Canon imageclass mf6530 scanner how to#
Canon imageclass mf6530 scanner drivers#
Canon imageclass mf6530 scanner update#
Canon imageclass mf6530 scanner upgrade#
Canon imageclass mf6530 scanner windows 10#

Press 'menu 2 8 menu' (menu is the head with the star, above no. This was really hard, but I solved it after a bit of frustration. Links (they might improve the search hit rate): Thank you for saving me a lot of trouble, not having to bring my Canon i-Sensys printer to an authorized Canon printer service centre. Having first printed a 'System Manager Data List' and a 'User Data List', this seems like a useful method to bring back your Canon i-Sensys MF family printer from various different problems. (Note, that on the Canon imageCLASS printers, it seems that you have to use '-', '+п»ї', ' ' and 'ok' keys to navigate through the 'clear - all' menu.) Performing a Canon printer factory reset, by first entering 'Service mode' pressing 'Menu 2 8 Menu' (menu is the head with a star within it, above key # 1) and then resetting the printer selecting 'Copier -> Function -> Clear -> All' and powering the printer Off and On again, - brought the printer back, performing an initial setup once again.

Googling for a solution I found this post and similar posts on BestSolution.at and Super User sites, - for other Canon printer models as well (nothing useful at Canon Support)! Everything went as described and completed successfully, except for the fact that the network communication problem persisted.

Canon imageclass mf6530 scanner upgrade#

So I decided to try the Firmware Upgrade again, this time using the USB Cable (remember to disconnect the LAN Cable). And as neither the PING test from the printer network settings menu nor from an external device got any response, I knew that somehow the firmware upgrade had failed. First I tried configuring the LAN settings manually, - but it didn't solve the network communication problem, then I tried 'Network Settings -> Initialize Network Settings' on the printer, and finally I tried 'System Settings -> Initialize All'. I could see on my WAN Router, providing the DHCP service, which the printer was asking for and that it got allocated its usual IP Address. This told me that my MF8340Cdn had lost its network configuration! Except for the network settings in the 'System Manager Data List' displaying 'IP Address: 169.254.137.209 - Subnet Mask: 255.255.0.0 - Gateway Address: 0.0.0.0'. As described in chapter 2-3 step 9 'Restart the machine' I then turned off the machine and waited for 10 seconds before turning it on again (maybe I should have pressed the key, as described in the note below, - but when I read that, I already had turned off the printer).Д®verything looked Ok, - also checking the new firmware versions as described in chapter 2-4 was Ok.

Canon imageclass mf6530 scanner update#

The actual firmware upgrade using LAN Connection took several minutes upgrading firmware 1, 2 and 3 (no firmware 4 in my printer) ending as described in chapter 2-3 step 8 'Firmware update is complete. I would also recommend printing the 'System Manager Data List' as it provides the network configuration settings).

Canon imageclass mf6530 scanner how to#

Unpacking the files and following the accompanying 'UST Operation Guide wm.pdf' didn't give any problems (I would though recommend documenting the existing settings before upgrading, as described in chapter 2-4 specifying how to print the 'User Data List'. I provided the printer serial-no as required and downloaded the v10.55 firmware upgrade. It didn't, - and I still don't know whether the problem lies in the upgrade procedure or in the firmware upgrade itself.

Canon imageclass mf6530 scanner windows 10#

So I looked for any other updates available on the Canon European support site and found a new firmware release v10.04 for: MF8380Cdw / MF8360Cdn / MF8340CdnДЄs my MF8340Cdn was still on the original v01.28 firmware and as Canon states it in the update presentation 'enables it to function correctly', - I thought that this new firmware might enable the printer to function correctly with the new Windows 10 ready printer drivers. 30th 2015) on my Windows 7 Ultimate workstation, the first print to my MF8340Cdn stalled in the spool queue.

Canon imageclass mf6530 scanner drivers#

This is what I did experience (hopefully the description might help other Canon i-Sensys printer owners finding it, when Googling for a solution):ДЄfter having upgraded the i-Sensys MF8300 family printer drivers to v20.55 (Windows 10 ready and dated Nov.

The factory reset described above by Pete Smith solved the problem! Similar solutions are provided by Udo Rader at BestSolution and on the Super Users site. I lost network communication to my i-Sensys MF8340Cdn printer after a Canon Firmware Upgrade. I have used the solution provided by Pete Smith to solve a LAN network connection problem, - not being able to find any help on Canon on-line support!